Back from Vacation

So I’m back from Estonia! I don’t think I mentioned I was going on vacation. Sorry. I was so excited to visit Tallinn for the first time that I just kind of ran out the door.

I finished off another lovely Clariel sword. It arrived in Germany safe and sound and now has a loving home.

IMG_2725[1]

I’d like to take a brief moment to talk about my packaging methods just in case anyone is curious. My blades are always packaged in materials that are bio-degradable, recyclable, or re-usable because I am committed to making my company as eco-friendly as possible.

IMG_2727[1]

When you open your package, you will find unbleached brown paper used for filling voids in the box (so the contents don’t rattle around inside). The sword is wrapped snugly in a fleece baby blanket, all tied securely with a ribbon. The colours of the blanket and ribbon may vary but my wrapping method is always the same.

Even though I work with plastics and craft things with plastics, I don’t want any plastic waste products. The way I see it: you’ll want to keep the sword forever, but not the packaging. So why should the packaging last forever? It shouldn’t! It should go back into the earth and continue the natural cycle of the environment.

Okay, enough jabber about tree-hugging stuff LOL! What’s up for this week? Well, I made a new mould jacket for my Clariel mould annnd … it doesn’t quite fit snugly enough so I have to trim it down a bit. I have to go find out how badly it leaked. Not looking forward to it. Yuck. But at least I had it wrapped up in plastic just in case it failed so it didn’t go all over the floor. It shouldn’t take too long to fix. Hopefully. Wish me luck!

Quick Update & A Lot of Pics!

Hi everyone! I’m in a bit of a rush today. Lots of running around picking up materials, doing research for tools I’ll be needing in the near future, and trying to get the last bit of work done on the Clariel model sword to create the final perfected mould. Gah! It’s crazy!

And 25 degrees is WAY too freaking hot for me! I’m melting. Seriously, I moved within sneezing distance of the Arctic Circle to get away from being toasted by the evil fireball in the sky …

Stop talking about the weather and give us pictures already Ethan! Okay okay. Yesssss I finished the 2nd cast resin Clariel last week and she is awaiting word from her Australian Shadowhunter to ship out. Here’s the pics I promised.

Shiny in the suuuuun! 😀

IMG_2566

Ahh you runed it! Haaaah terrible pun … *ducks head in shame*

IMG_2569

I’ve been working on getting my rare-earth magnet closures smaller and tidier for a nice sleek look. How did I do guys? 🙂

IMG_2571IMG_2573IMG_2574

Oooooh shiny! Yes it’s in my sauna. LOL I currently have nowhere else that is dark enough to show you the full glory of the sword lit up. But you know what? I’m rather proud to be living and working in Finland so I think it’s kind of fitting that the quintessential Finnish element of the sauna plays a role in my work even if it’s a small one. 🙂

That’s it for me for the day everybody. I’ve got to get going. There is SO much sanding and polishing to do and OMG I almost forgot!

IMG_2507

This one. This one is not yet claimed! If you want this Clariel for your very own, I have an Etsy listing for you to pounce on right HERE. And since it’s not yet finished, YOU get to choose what kind of finish you want to have on it. Lit? Unlit? Runes? No runes? Some runes? Different runes?! It’s up to you. Your wish is my command! 😉

Have a great day everybody! I’m off to … everywhere, probably all at once. LOL

Second Clariel

I’m so excited guys! I’m almost finished the second cast resin Clariel sword and it is gorgeous.

IMG_2546[1]

The handle is all painted to simulate the look of weathered steel and the whole thing has been given three layers of high-gloss sealer. This sealer protects the sword from scratches and the yellowing effect that UV rays can have on resin over time.

IMG_2550[1]

I’m committed to making items that stand the test of time so it’s very important to me that each sword has adequate protection against wear.

All that’s left to put on this sword is the handle strap and it will be ready to go to its new home! This Clariel is promised to a lucky Shadowhunter already but the 3rd resin cast Clariel is still unclaimed! Will it be yours?

IMG_2507

Ooh Shiny!

So I played with my new silicone mould last week as I continue my witchlight experimentation. I thought you might like to see the results. I was delayed a little bit at first since the plaster mould jacket I made broke.

IMG_2452
Whoops.

So I had to make a new one out of wood. That whole incident took a couple days more than I was expecting but I bounced back fairly quickly. And of course, I learned things! Time spent learning is never wasted. 🙂   (and my clamps may have learned a few new curse words …)

Aaaaanyway. Look! A shiny rock!

IMG_2458
Yaaaaay!

It’s flat on the bottom so I can more easily work on the whole internal electronics stuff. The resin is so clear, it looks like it’s hollow, but it’s actually solid!

IMG_2459

So next for this little treasure? I’ll be messing about with tiny electronics and figuring out how I’m going to hide a light inside a clear object. I’m thinking it will probably be similar to the witchlight you saw in The Mortal Instruments film that was kind of cloudy inside with some imperfections like a natural stone would have. Kind of like quartz?

Witchlight
You know the one I mean.

It’s fairly safe to say that adamas would look something like this before it’s refined and worked by the Iron Sisters. At least as far as we can estimate by looking at how mundane metals and crystals behave. I’ll be playing with pigments, dyes, and different kinds of inserts to see what yields the best and most natural looking crystal, while still being able to light up. Y’know just … the usual high wizardry.

I’m sure I’ll figure it out. My superpower is stubbornness.

But! I didn’t spend my entire week on a rock. Nope! I was levelling up my crafting skill finishing off the first ever cast resin Clariel sword!

IMG_2476
Super DUPER shiny. 😮
IMG_2478
The hilt is a combination of polymer clay and leather.

I’m working on making the seams smoother so it’s more difficult to see where the handle opens up. This sword, like the ones before it, has an invisible light switch. Wait, it lights up?

IMG_2487
Of course it does!
IMG_2489
We must have the very shiniest! 😀
IMG_2490
Also functions as a flashlight. Y’know. Just in case.

So does this mean I’m taking orders now? Kinda? I have a mould but I want to make a better quality one since this one has some imperfections in it that I have to spend extra time buffing out when I finish each sword. Rawr! Since silicone is quite expensive, I’ll be selling the three Clariel blades I currently have so I can actually afford to do that.

Of course, those who have been waiting patiently on the contact list get first dibs on the blades up for sale cause that’s only fair. BUT! I can add your order to the list and let you know when one becomes available. I can’t give actual dates quite yet as to when I can complete those orders but I am definitely working on that. And no, you don’t have to put down any kind of payment on the order before I have a completion date for you. I’ve done that before and it’s really stressful on both me and the nice Shadowhunter waiting for their sword!

This whole ordering process thing WILL get easier in the future. Once I’ve got things the way I need them to be (ie: a quality mould I’m happy with and reliable crafting times from start to finish) I will be opening an official web shop for you to find my stuff and buy what you want. I’ll still be taking custom orders, of course. I just need to streamline the crafting process so I actually have time to make custom pieces again.

Enough blathering from me! I must go to the workshop and get busy finishing those other two blades. See you later!

OOOOWWWWW! Darnit!

Yes, I know. I went quiet again. Thing is: I cut the tip off my left ring finger by accident. Well, of course it was an accident. I’m not that bonkers.

EDJI8924[1]

Now, it’s healing quite well. Got some nice pink new skin coming in and I should have full function of my finger, but the wound is still fresh enough that I still can’t do any carving without it … uh … well, leaking. Ewwwww. No I’m not gonna show you any pics of the boo boo itself. That’s gross.

I go on vacation to Canada to see my friends and relatives that I haven’t seen for two years. I had hoped to have the sword model finished and moulded in silicone, ready for resin casting when I got back. Needless to say, that’s gotten pushed back.

It’s frustrating. I get a new request for a sword pretty much every second day and I really, really want to be making all those pretty shiny things for y’all right now! This is just rotten luck I tell ya. I’m super duper bored cause, well, it’s my finger. Everything I do requires the use of both my hands. Even typing is weird and slow because I can’t push the W, S, or X button with the finger I’m supposed to.

Anywho, grump grump grump, pout pout pout, rawr. I swear I’m not being lazy. I’m just full of OUCH. Yes I will get to your emails. Thank you for being patient with me. Stay awesome. ❤

Shaping the New Blade

Just a sneak preview of the new sword in progress! It is the longest blade I’ve ever done so I’m keeping it a bit thicker in the center to preserve its strength. Please pardon the ridiculous pillowcase on my head. It’s the only way I can keep the acrylic dust out of my hair! Otherwise I look like I’ve been spontaneously snowed on.

It’s another sunny day so it looks like I will have a chance to finish the shaping today! Until next time, happy hunting!