Yeah! I’m chewing my way through projects at the workshop. I’d love to be making progress faster but my goodness I will accept just moving forward as a success!
What have I got for you this week? Let’s have a look. I’m finally getting some perfect casts with the Malechai heads. Finally.
Dude that doesn’t look perfect. Well of course it doesn’t. The crud you see at the top of his forehead there is a bubble-trap. I had to make an extra-large one there because this resin hardens so crazily fast that I have to provide extra room for the bubbles to go. They just can’t escape the mould before the goo hardens. The blips on his ears are also bubble-traps. There’s a bit of flash in his eye-holes and along his jawline but this is quite normal. It just gets sanded off. Flash happens when a bit of resin leaks in between the two halves of the mould.
The important thing is: no bubbles are present in any of the parts we care about. Just the bits that get cut off.
Naturally, I’m still looking for a resin that gives me a bit more working time while still being opaque white. Until then, though, there are people patiently waiting for these doll heads and I must finish them! So this week will be a lot of gentle, careful sanding and casting the caps for the back of the heads. I hope to be shipping these beauties by the end of this week. Cross your fingers that nothing else goes wrong. (Please art gods, haven’t I been through enough with one project? Can’t you torture me with something new now?)
We also have a Sariel on the go! Working away at getting that first prototype mould done.
Looks like a tasty sandwich of … actually, ew. No I wouldn’t eat that. Anyway. I’ve gotten the thing flipped over, all the clay cleaned off the latex, re-balanced on the foam board, and the “box” re-constructed around it. Also got some mould wax (separating agent) painted all over it so the latex shouldn’t stick to the other latex when I put it in. Hopefully this method will work out okay and I’ll be able to bring you more sword styles at a lower cost.
Speaking of lower costs! I’m working out some new ideas for making prototypes and putting out new styles for you guys. Here’s my chief problem right now: money. Silicone is craaaazy expensive but it’s something I can’t do without. The mother moulds that will create each beautiful sword that appears on my Etsy shop has to be made of high-quality silicone or it will end up breaking down in a few months and I’ll have to make a new one. That’s not only a waste of money but it’s terrible for the environment! Resin is a bit cheaper than silicone but it’s still not just pocket change. Every mistake I make costs me money. Usually a lot of it.
My vacuum pump is limping along, slowly dying (because I’m an idiot and put the wrong kind of oil in it for a few months) while I try to work up the funds to replace it. My electric cooler is also dying a horrible noisy death. I’ve had to use it every day to keep my food cool because somebody on my floor keeps stealing my food from the break-room fridge. This leaves me without any lunch. 😦 There is nowhere nearby to buy grocery food, not to mention that, well, having a really tight budget means I can’t just eat at a restaurant or buy my lunch every day. So I’ve had to force my poor little cooler to work much harder than it was ever designed to do.
I’ve already had to downsize my workshop by more than half and now I have to carry water in from the bathroom because there’s no faucet and sink in my new room. I cannot work in any smaller space than this. I don’t have enough space to work on three projects at once. This means sitting, wasting time watching glue/paint/resin dry. I feel the squeeze guys. I really feel it. I’m doing my best to keep on working and making cool stuff, trying not to use “disposable” plastics or Styrofoam (which is cheaper but horrible for the environment), and keeping the quality of my products top-notch while still being affordable. It’s not easy.
Where does that put us in terms of getting cool swords (and now dolls!) into your hands? Well, I’m at the point where I need to sell swords in order to be able to afford the materials to make more swords. There’s a bunch of people who want swords, but they’re not interested in the Clariel model. Some want Gabriel, some want Sariel, some want Jahoel, and some even want a Michael. I want to make them! You want me to make them! Yes! So what we need to do is somehow get all the people together who want the same model of sword and get the project funded.
That … sounds like a Kickstarter! Ooooh. Could I? Should I? If I can just get the darn moulds made, making the actual swords is not so hard. I’ve already got lots of experience with that! But the funding … it’s so expensive for just one person alone to fund the project. Right now that one person, alone, funding each sword project is me. We’ve got to fix that so I can make some headway.