Pretty & Smelly: Solvent Paints!

This beauty is sitting in my workshop right now, all ready for a heat-cure on the green-blue lacquer you can see on the handle there. What is this wondrous paint that sticks to resin? It’s Deka Transparent Glass Paint.

It’s bold. It’s beautiful. It smells really bad. And nothing else works quite so well! So if you want to treat yourself to this rocking good fun that is painting on resin, you will need a protective mask that will guard against vapours. Yes. Specifically vapour. A regular dust-mask filter will not save you from the smell of this solvent-based paint. I tried just painting it on without any mask, thinking “oh it can’t possibly be that bad”. Yes. Yes it can. I got dizzy and my sinuses burned like I’d just snorted nail polish remover.

Yes, you can certainly do it outside. It’s currently 1C outside for me so … not an option. Vapour protection it is then!

Is it worth it? Ohhhh baby. Yeah. I mixed the greenblue translucent paint with the black translucent paint and then diluted it with acetone. You must use acetone and not water because Deka translucent glass paint is solvent based. It will not play nice with water. You’ll have to use a solvent.

I airbrushed the paint onto the sword hilt. Heavier on the back of the handle and lighter toward the hilt and blade because I wanted it to fade into clear. I wasn’t bothered by the uneven “waves” in the paint where I sprayed it (a little too diluted I think) because I was trying to achieve a water-like effect.

What else do you need to know about Deka Transparent Glass Paint? It needs to set for 72 hours. So if you’re in a hurry, uh … well don’t be in a hurry. After the three days have passed, you should give it a heat-treatment.

The instructions recommend putting the piece in an oven but there’s two reasons why I can’t do that: 1. My piece is made of resin and will deform at roughly 100C, and 2. My sword won’t fit in my oven. So I’ll be using a heat gun (carefully!) to do the heat treatment.

I’m really excited to finish up the handle and show you the piece! I’m not sure if I’m installing a light in this one or not. I kind of want to but I’m nervous of cutting into that pretty blue handle now that I’ve got it all nice … we’ll see.