Workshop is Operational!

2015-09-23 17.27.39

Yeaaaaaah! That feels good. First cut done on a couple new short swords. I had to use a hack-saw to shorten the long piece of plastic because it wouldn’t fit on the bandsaw’s table. Mo’ plastic mo’ problems? Meh.

2015-09-23 17.28.01

These are my new babies. Belt sander and band saw respectively. They still need to be bolted to the table. And I’d REALLY like to get some sound proofing in the workshop before I fire these things up because they’re quite loud. I have some contoured foam incoming to attach to the wall so my neighbours will hate me a little less. Hopefully.

2015-09-23 17.28.13

To give you an idea of how hard acrylic plastic is, this was a brand new hack saw. Was. So, for those of you wondering “could I possibly do this project without a band saw?” Yes. Yes you can. But you will need plenty of blades to switch in when they wear out.

2015-09-23 17.28.21

I’m not kidding. This one is for cutting metal. So if you’re making one or two Seraph Blades for yourself, a hack saw will do for the rough cuts provided you have enough sheer stubbornness and elbow grease to get through it.

For those of you waiting on orders thank you for your patience. If my health will just continue to improve and my machines cooperate nicely, I should be back in the shop regularly soon.

Fresh Batch Of Acrylic

Woo! It arrived!

2015-09-18 13.09.26

Inside this violently yellow package is a tightly-wrapped bundle of ten acrylic slabs. Yes, it’s heavy. About 50lbs. The delivery fella wasn’t sure I could carry it but luckily I lift weights. All that exercise has gotta be good for something!

2015-09-18 13.16.11

Will it be 10 longswords? Will it be 20 short swords? Or perhaps 30 daggers? It could be a mix of all three!

Stay tuned to find out what’s coming next from the Adamant Studio…

Materials Arriving Tomorrow!

The raw adamas (acrylic) is set to arrive at the Adamant Studio tomorrow! I can’t wait!

Clear Acrylic

My new distributor is VINK and their slogan “passion for plastics” caught my eye immediately. They’re significantly more expensive than my previous supplier Johnston Plastics but seeing as I’m now located in Helsinki, Finland, my options are limited. Still, I’ll do my best to keep prices affordable for all my fellow Shadowhunter fans.

So all you fantastic folks who have placed orders for this upcoming autumn, rejoice! The re-establishment of the Studio is coming together on schedule and I’ll be able to get crafting as soon as my tools arrive. I’ll keep you posted on arrival dates and my crafting progress as per usual.

Until the next update: this is the Adamant Studio signing off!

Furnishing the Workshop

It’s happeniiiiiiing! Just placed an order last night and my new babies are on their way to me.

belt sander

A nice badass belt sander …

band saw

And a big ol’ band saw.

For a tough material like acrylic, nothing of lesser calibre will do. As soon as I have these and my plastics in hand, I can get to crafting. Stay tuned for more news.

Special Announcement

The Adamant Studio has received word that Julie is in need of a Seraph Blade to commemorate her birthday. In honour of this occasion, a short-sword has been commissioned and designed by the Studio to properly arm her against the powers of darkness.

2015-09-01 13.33.52

It is now in the first stages of its creation. We will keep you posted on its progress. Until then, continue protecting your family and the nation of Norway from demonic forces. Good luck Hunter.

This is the Adamant Studio, signing off.

News from the Adamant Studio

My freshly-acquired workshop!

It’s not much to look at right now but we just signed the lease yesterday. I’ve managed to secure a headquarters large enough to have a dedicated workshop. If all goes according to plan, the Adamant Studio will soon been in operation once again and I can start making new Seraph Blades! Can’t wait!

Stay tuned for more news and, as always, happy hunting.

The Forging of Azrael

DSC_0312

At long last, I am pleased to present you with the Seraph blade Azrael. It’s been finished for some time now, but I have only had a chance to post about it now.

Azrael is the largest and longest blade I have ever crafted at the time of this posting. Its total length comes in at a whopping 30 inches. It can be wielded with one hand or two though due to it’s length and weight, I recommend using both hands.

This was the last blade to be forged in the Adamant Studio in Montreal before I moved to Finland and I’d like to share with you the making of my favourite sword to date.

Continue reading “The Forging of Azrael”